Wang, D., Kahn, H., Ernst, F., & Heuer, A.(2017)."Colossal" interstitial supersaturation in delta ferrite in stainless steels: (II) low-temperature nitridation of the 17-7 PH alloy.Acta Materialia,124, 237-246.
Dai, L.(2017).. “A turn-on fluorescent lysine nanoprobe based on the use of the Alizarin Red aluminum(III) complex conjugated to graphene oxide, and its application to cellular imaging of lysine”.Microchimica Acta., 201,184,(9), pp 3521–3528.
Xu, J., Mahmood, J., Dou, Y., Dou, S., Lin, F., Dai, L., & Baek, J.(2017).2D Frameworks of C 2 N and C 3 N as New Anode Materials for Lithium-Ion Batteries.Advanced Materials,29(34).
Wang, C., Liu, Y., Huang, S., Griswold, M., Seiberlich, N. E., & Yu, X. E.(2017).31 P magnetic resonance fingerprinting for rapid quantification of creatine kinase reaction rate in vivo.NMR in Biomedicine.
Zamani, H., Lee, J., Rajgopal, S., & Zorman, C.(2017).3C-SiC microdisk mechanical resonators with multimode resonances at radio frequencies.Journal of Micromechanics and Microengineering.
Yu, S., Egusa, H., Zhao, X., Liu, Y., Jenkins, M., Watanabe, M., & Rollins, A. M.(2017).3D characterization of EMT cell density in developing cardiac cushions using optical coherence tomography (Conference Presentation).SPIE BiOS,10053
Chen, Q., Mangadlao, J., Wallat, J., De Leon, A., Pokorski, J. K., & Advincula, R. C.(2017).3D Printing Biocompatible Polyurethane/Poly (lactic acid)/Graphene Oxide Nanocomposites: Anisotropic Properties.ACS Applied Materials & Interfaces.
Palaganas, N., Mangadlao, J., De Leon, A., Palaganas, J., Pangilinan, K., Lee, Y., & Advincula, R. C.(2017).3D Printing of Photocurable Cellulose Nanocrystal Composite for Fabrication of Complex Architectures via Stereolithography.ACS Applied Materials & Interfaces,9(39),34314-34324.
Manapat, J., Chen, Q., Ye, P., & Advincula, R. C.(2017).3D Printing of Polymer Nanocomposites via Stereolithography.Macromolecular Materials and Engineering.
Nagelli, E., Huang, L., Dai, A., Du, F., & Dai, L.(2017).3D Vertically Aligned CNT/Graphene Hybrids from Layer-by-Layer Transfer for Supercapacitors.Particle and Particle Systems Characterization.
Fan, S., Zhao, L., Wang, P., Wei, R., Zheng, X., & Wang, Z.(2017).A battery-less, 255 nA quiescent current temperature sensor with voltage regulator fully powered by harvesting ambient vibrational energy.IEEE International Symposium on Circuits and Systems (ISCAS).
Lam, P., Keri, R., & Steinmetz, N.(2017).A Bioengineered Positive Control for Rapid Detection of the Ebola Virus by Reverse Transcription Loop-Mediated Isothermal Amplification (RT-LAMP).ACS Biomaterials Science & Engineering.
Zuanetti, B., & Wang, T.(2017).A compact fiber-optics based heterodyne combined normal and transverse displacement interferometer.Review of Scientific Instruments.,88, 033108.
De Vos, C., Baneton, J., Witzke, M., Dille, J., Godet, S., Gordon, M., Reniers, F., & Sankaran, R.(2017).A comparative study of the reduction of silver and gold salts in water by a cathodic microplasma electrode.Journal of Physics D,50, 105206.
Wu, D., Jennings, C., Terpenny, J., Gao, R. X., & Kumara, S. X.(2017).A Comparative Study on Machine Learning Algorithms for Smart Manufacturing: Tool Wear Prediction Using Random Forests.Journal of Manufacturing Science and Engineering,139(7).
Pickering, E., Hossain, M., Mousseau, J., Swanson, R., French, R. H., & Abramson, A. R.(2017).A cross-sectional study of the temporal evolution of electricity consumption of six commercial buildings.PLoS ONE,12(10).
Wang, P., Gao, R. X., & Yan, R. X.(2017).A deep learning-based approach to material removal rate prediction in polishing.CIRP Annals - Manufacturing Technology.
Quan, L., Sun, J., Bai, S., Luo, R., Li, D., Chen, A., & Liu, C.(2017).A flexible sensor based on polyaniline hybrid using ZnO as template and sensing properties to triethylamine at room temperature.Applied Surface Science,399, 583-591.
Wu, D., Liu, S., Zhang, L., Terpenny, J., Gao, R. X., Kurfess, T. X., & Guzzo, J. X.(2017).A fog computing-based framework for process monitoring and prognosis in cyber-manufacturing.Journal of Manufacturing Systems,43, 25-34.
Dong, Y., & Li, Y.(2017).A Framework for Hurricane Resilience of Residential Community.ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering,,2(3),04017008-1..
Vandendriessche, B., Abas, M., Dick, T., Loparo, K. A., & Jacono, F. A.(2017).A Framework for Patient State Tracking by Classifying Multiscalar Physiologic Waveform Features.IEEE Transactions on Biomedical Engineering.
Szczecinski, N., Hunt, A., & Quinn, R. D.(2017).A Functional Subnetwork Approach to Designing Synthetic Nervous Systems That Control Legged Robot Locomotion.Frontiers in Neurorobotics,11
Dai, L.(2017).A general approach to cobalt-based homobimetallic phosphide ultrathin nanosheets for highly efficient oxygen evolution in alkaline media.Environ. Energy Sci..
Qian, Y., Yan, R., & Gao, R. X.(2017).A multi-time scale approach to remaining useful life prediction in rolling bearing.Mechanical Systems and Signal Processing,83, 549-567.
Chang, S., Nandor, M., Li, L., Kobetic, R., Foglyano, K., Schnellenberger, J., Audu, M. L., Pinault, G. L., Quinn, R. D., & Triolo, R. D.(2017).A muscle-driven approach to restore stepping with an exoskeleton for individuals with paraplegia.Journal of neuroengineering and rehabilitation,14(1),48.
Lin, W., Szczecinski, N., & Quinn, R. D.(2017).A neural network with central pattern generators entrained by sensory feedback controls walking of a bipedal model.Bioinspiration and Biomimetics.
Hu, Y., Gunapati, V., Zhao, P., Gordon, D., Wheeler, N., Hossain, M., Peshek, T., Bruckman, L., Zhang, G., & French, R. H.(2017).A Nonrelational Data Warehouse for the Analysis of Field and Laboratory Data From Multiple Heterogeneous Photovoltaic Test Sites.IEEE Journal of Photovoltaics,7(1),230–236.
Zuanetti, B., & Wang, T.(2017).A novel approach for plate impact experiments to determine the dynamic behavior of materials under extreme conditions.Journal of Dynamic Behavior of Materials,3, 64-75.
Wang, R., Zhang, L., Hu, D., Liu, C., Shen, X., Cho, C., & Li, B.(2017).A novel approach to impose periodic boundary condition on braided composite RVE model based on RPIM.COMPOSITE STRUCTURES,163, 77-88.
Unal, M., Timur, S., Uppuganti, S., Akkus, O., & Nyman, J.(2017).A novel Raman parameter correlates with the fracture toughness of human cortical bone..,32, S304--S304.
Akkus, A., Yang, S., Roperto, R., Mustafa, H., Teich, S., & Akkus, O.(2017).A portable fiber-optic raman spectrometer concept for evaluation of mineral content within enamel tissue.Journal of Clinical and Experimental Dentistry.
Islam, M., Mandal, S., & Singh, S.(2017).A programmable sustaining amplifier for reconfigurable MEMS-referenced oscillators.IEEE International Midwest Symposium on Circuits and Systems (MWSCAS).
Mandal, S., & Sarpeshkar, R.(2017).A Simple Model for the Thermal Noise of Saturated MOSFETs at All Inversion Levels.IEEE Journal of the Electron Devices Society,5(6),458-465.
Dhar, T., Bhunia, S. K., & Trivedi, A. K.(2017).A solitary protection measure against scan chain, fault injection, and power analysis attacks on AES.IEEE International Midwest Symposium on Circuits and Systems (MWSCAS).
Sneed, L., Ravazdezh, F., Santandrea, M., Imohamed, I., & Carloni, C.(2017).A study of the compressive behavior of concrete columns confined with SRP jackets using digital image analysis.Composite Structures,179, 195--207.
Hubilla, F., Mabilangan, A., Advincula, R. C., & Del Mundo, F. C.(2017).A Surface Plasmon Resonance Histamine Sensor Based on an Electropolymerized Molecularly Imprinted Polymer (E-MIP).MATEC Web of Conferences,95
Tuna, G., Kogias, D., Gungor, V., Gezer, C., Ta\csk\in, Erhan, C., & Ayday, E.(2017).A survey on information security threats and solutions for Machine to Machine (M2M) communications.Journal of Parallel and Distributed Computing,109, 142--154.
Tuna, G., Kogias, D., Gungor, V., Gezer, C., Ta\csk\in, Erhan, C., & Ayday, E.(2017).A survey on information security threats and solutions for Machine to Machine (M2M) communications.Journal of Parallel and Distributed Computing,109, 142--154.
Yue, L., Maiorana, A., Patel, A., Gross, R., & Manas-Zloczower, I.(2017).A sustainable alternative to current epoxy resin matrices for vacuum infusion molding.Composites Part A: Applied Science and Manufacturing,100, 269-274.
